$12.99
- +

Brisk Iridium Performance P10 BR14YIR Spark Plug

p demo


BRISK IRIDIUM PERFORMANCE BR14YIR Spark Plug 12mm thread, 3/4"(19mm) reach, 5/8"(16mm) hex, gasket seat, projected tip, resistor, 0.8mm Iridium center el., cut-back ground el., power focus, flash-over suppression.


BRISK Iridium Performance Spark Plugs


The use of combination of center electrode with Iridium contact and ground electrode from Yttrium alloy with copper core cut to spark plug center decreases demand for voltage, it opens the spark gap into combustion chamber and significantly suppresses flame extinguishing effect at cold starts. In so doing the spark plugs change interval 65,000 miles is maintained.


WORK OF EXIT


The material used to the spark plugs has a major impact on lifetime and functional properties. While precious metals such as Platinum and Iridium are very resistant to wear, but have a considerable demand for high voltage generated by the ignition system. The combination of Iridium center electrode and ground electrodes of special design with Yttrium alloy which is based on Nickel is an ideal solution for maintaining lifetime and spark plug performance improvements.


VOLTAGE REQUIREMENT/TOTAL VOLTAGE REQUIREMENT


The requirement for power generated by the ignition system is also influenced by the geometric shape of the spark gap. Optimal combination of the spark gap and the reduced demand for form by appropriate choice of electrode material effect synergic on improvement of spark plug performance.


THE AREA CARRYING OFF HEAT FROM COMBUSTION CORE IN INITIAL PHASE AT A COLD START


Significant surface reduction of electrodes from which the heat is carried off at cold starts eliminates the flame extinguishing. Significant improvement of cold starts.

Thread
12mm
Reach
19mm
Hexagon
16mm
Seat
gasket
Design
Iridium Performance
Resistor
Yes
Projected
Yes

Reviews

There are yet no reviews for this product.