Brisk Iridium Performance P25 GR17BYIR-3 Spark Plug
BRISK IRIDIUM PERFORMANCE GR17BYIR-3 spark plug.
14mm thread, 18mm reach, 16mm hex, tapered seat, projected tip, resistor
BRISK Iridium Performance Spark Plugs
The use of combination of center electrode with Iridium contact and ground electrode from Yttrium alloy with copper core cut to spark plug center decreases demand for voltage, it opens the spark gap into combustion chamber and significantly suppresses flame extinguishing effect at cold starts. In so doing the spark plugs change interval 65,000 miles is maintained.
WORK OF EXIT
The material used to the spark plugs has a major impact on lifetime and functional properties. While precious metals such as Platinum and Iridium are very resistant to wear, but have a considerable demand for high voltage generated by the ignition system. The combination of Iridium center electrode and ground electrodes of special design with Yttrium alloy which is based on Nickel is an ideal solution for maintaining lifetime and spark plug performance improvements.
VOLTAGE REQUIREMENT/TOTAL VOLTAGE REQUIREMENT
The requirement for power generated by the ignition system is also influenced by the geometric shape of the spark gap. Optimal combination of the spark gap and the reduced demand for form by appropriate choice of electrode material effect synergic on improvement of spark plug performance.
THE AREA CARRYING OFF HEAT FROM COMBUSTION CORE IN INITIAL PHASE AT A COLD START